Coin Acceptor —— Global multi-coin coin acceptor

About WeiFu

Hot Products Show

For Automatic Door

Motion Door Sensors

Safety Beam Sensors

Door Switches

Accessories

GSM-KEY for electric gate opener

GSM with KEYPAD access controller

GSM intercom for door access

Person Counter

Sensor Application

For Vending System

Multi-Coin Coin acceptor

Electric Coin acceptor

ITL Bill Acceptor

Vending Machine

GSM Vending Management

Kiosk Computer Controller

MDB-RS232 / RS232-MDB Payment adapter

Technical FAQ

GSM and 3G/4G Controller

GSM-VEND for Vending

GSM-KEY For Autodoor

GSM-Intercom For Automatic Door access

GSM Alarm Box

GSM Power Strip

GSM-Water Tank Units

GSM Temperature Monitoring Units

RTU5024 / RTU5015 GSM Gate Opener

GSM Remote Control Box

3G/4G Remote Control Box

GSM Project Show Room

Wifi Series Products

Service

Quick Online service

Download

Links

Company Links

Friendly Links

Products Quick Link

Validate Cooperation List

GL315 CPU Recognise Coin Acceptor(CPU Multi-coin coin acceptor)

An intelligent multi-Coin acceptor can memorize and recognize 3 different type coins with different signals from 1 pulse to 99 pulses. The product include software guard system, and this alarm system can prevent opportunistic behaviors. It it not only good for your Amusement Machine but also Vending Machines.

Coin Acceptor Specification:

Net weight: 0.375kgs/each

single chip auto recognize system

Signal output in pulse

Apply to coin diameter:18mm-29mm

Apply to coin thickness: 1.2mm-3mm

work voltage: DC12V (+/- 20%)

current in 50ma

CPU system identify the coin's material, thickness and diameter

Include software guard system

Can connect the counter

TIME SWITCH can be set to fast-25ms, medium-45ms and slow-65ms

How To Set Up the Coin Acceptor With The Game Machine:

Step 1: operate with the game machine's standard mode Normal Open

Step 2: switch to the correct speed(pulse) of coin machine: FAST 25ms, MEDIUM 45ms and SLOW 65ms

Step 3: Connecting the +12V DC and Ground wiring for the coin Acceptor.

Step 4: Arrange the token sample that you want the Coin acceptor to accept

Step 5: Set the switch from "Start" to "Set" position, the LED light will show "00", press the switch which for adjusting the coin's value, to adjust the coin value when the coin programming. "00-99" means how many times of the out pulse signal will be sent when the programmed coin was deposited, return the switch from "Set" to "Start", it is finished

Step 6: Set the switch from "NOM" to "MGN" position, then turn the switch from "Start" to "Set" position, the LED show default "P1", "P1-P9" means a output signal needs how many programmed coins to be deposited like "P1, P2, P3...P9"

Step 7: Prepare the needed sample coins.

Step 8: Insert 10pcs coins in turn to set the coin (time interval 0.3 seconds)

Step 9: Turn the coin set switch to "Start" and finished the setting.